How much spray paint to use when respraying a bmx? - how much paint to spray bmx
I'm not much on a BMX ml
Monday, February 15, 2010
How Much Paint To Spray Bmx How Much Spray Paint To Use When Respraying A Bmx?
Subscribe to:
Post Comments (Atom)
2 comments:
You will need a big box of primers, 1 or 2 small cans of paint, and 2 boxes of Clair. See below.
1) After the complete dismantling of the wheel, you have sanded to remove all of the lens. If the frame is made of aluminum outside, he criticized the mother, or may be chemically peeling paint.
2) spray as soon as possible with the first gray paint sanded. Paint Brand DupliColor paint, I think, and you can get your accessories business. Do not buy big boxes, small. Apply at least 1 can be fully realized, in shifts of 15 minutes. Not about the light is now running to worry about.
3) Wait at least 48 hours. There is a difference between painting and paint dry cured ... that must be overcome. First use of 220 grain sandpaper to aluminum oxide (white cSmell), until the surface is smooth. You should not take long if you have a lot of running.
4) By a tack cloth, lightly not rub on the entire frame (go!) In order to remove the sanding dust.
5) Apply several layers of light (3 or 4 perhaps) the color of your choice. Make sure the picture is completely covered. Follow the instructions on the box. Here, too, paint using the same mark as for priming. Apply a layer of 1 / distance of 2 hours. Be sure to cover all parties and not executed. If you go ask too much.
6) Do not sand the paint. A layer of clear coat, about 2 boxes full of dollars, coats 15 minutes ..
7) Allow the frame alone until you do not paint the feeling when you close and take a deep WHFIB. If you can not smell, dry! This process takes 2 to 3 days at least.
8) CAREFULLY wet sand the whole picture with 800 particles, 1000 sandpaper. Be sure to keep the paper damp cloth to wipe the mud and I know that clean manner. When you begin to change the color of the suspension, to see STOP! It is difficult to sand and reach the layers of paint. Repeat steps 5, 6 a.m. to 7 p.m., then try again. Do not attempt to fine-tune the environment, it is terrible.
9) Using white paste polishing agent, follow the instructions and polishing the entire frame.
10) DO NOT wax or wash for at least 10 days.
When you finish it with a sloppy throw chaos and try to blow forever. However, if you take your time and do it yourselfa very awesome feeling.
Well, you must 80grit sandpaper, and 180 (80grit sand the frame and then go to 180, until it loses its brightness) buy a can of spray paint and then primary and autonomy in this context, the sand with this finest grain 300 or up They are soft, then use 2 cans of spray paint to 4.5 size and is very easy, until the card is n, then use a layer.
Post a Comment